Macrium Support Forum

This forum is for Version 5 of Macrium Reflect.
Version 6 users should join our new forum here.

Version 5 support expired on 17 February 2016.

Find out more
Macrium Support Forum
Macrium Support Forum    RSS 2.0  RSS Feed      KB
Home | Profile | Register | Active Topics | Members | Search | FAQ
Save Password
 All Forums
 Reflect v5
 Disk Imaging
 Restoring an iamge to an external system drive
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Ron Hirsch
New Member

30 Posts

Posted - May 06 2017 :  13:42:50  Show Profile  Reply with Quote
I have a few questions about my MR paid version 6.2.1745, which I upgraded to earlier this year.

1. Do I need to create a new recovery CD. or will an earlier recovery CD still work OK?

2. I installed the Windows PE setup, where I get an option during boot to do a normal boot, or boot directly into MR, without using a disk to do so. Of course, if my C drive is non functional, I know I would have to use a CD disk to boot.

3. I plan on replacing the existing SSD C drive with a larger SSD. In a case where I will be replacing the C drive, which is still functional - I assume I could restore an image to the new C drive, which would be outside of the machine, and after that, shut down the system, and physically replace the old drive with the new, and that would work just fine, with the system now booting up via the new drive. Is this correct?

Thanks for the help.
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Macrium Support Forum © Paramount Software UK Ltd Go To Top Of Page
This page was generated in 0.09 seconds. Snitz Forums 2000